ULTIMATE series A5, a three-channel amplifier rated at 2 x 85 Watts in stereo an 1 x 300 Watts in mono. In two ohm load it delivers 2 x 100 Watts in stereo and 1 x 500 Watts in mono. The mono channel is 1 ohm stable.
- Built-in fan control.
- Built-in, variable 50-125 Hz switchable high-pass filter and a 40 - 90 Hz low-pass filter for subwoofers.
- The sub channel is also equipped with a disconnectable 25 Hz subsonic filter.
The perfect amplifier for a good front system and one or more subwoofers in the trunk.
-Remote sub level control that includes phase shift control 0-180 degrees.
- RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion
| Number of channels | 3 |
| Amplifier class | AB |
| Damping factor | > 200 |
| Mono bridge mode 4 ohm | N/A |
| S/N ratio, A-weighted | >100 dB |
| Output power in 4 ohm | 2 x 85 W |
| Output power in 2 ohm | 2 x 100 W |
| Mono sub channel 4 ohm | 300 W |
| Mono sub channel 2 ohm | 500 W |
| Input impedance, high level | N/A |
| Mono sub channel output in 1 ohm | 780 W |
| Frequency range | 10 Hz - 50 kHz |
| Input sensitivity | 0,2 - 7 V |
| Input impedance | >10 kohm |
| Filters channel A & B | HP: 50-150 Hz |
| Filter sub channel | LP: 40-90 Hz, Subsonic 25 Hz / 18 dB |
| Low level output | No |
| Remote bass level control | Yes |
| High level input with auto start | No |
| Remote phase shift control | Yes |
| External cooling fan terminal | Yes |
| Phase control for subwoofers | 0-180 degrees |
| Power consumption (idle) | 0,5 A |
| Power consumption (max) | 90 A |
| Rec. power cable | Minimum 4AWG / 21 mm2 |
| Fuses | 3 x 30 A |
| Dimension (W x D x H) | 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch) |
| Weight | 5,9 kg ( 13 lb) |
Svenska
English
